QE company

  • Hopper dryer

    Hopper Dryer

    0.00

    0.00

    1.The most effective way of drying plastic materials; 2.Smooth pipe designed to avoid plastic dust ; 3.Internal parts are made of stainless steel; 4.Hinged construction for easy cleaning; 5.Electric temperature controller; 6.Two overheat protection devices; 7.All models offer the timer, microprocessor and insulated tank for option; 8.The P.I.D temperature controller and LED display; 10.Transparent eye-glass magnetic plinth

  • Auto Loaders

    Auto Loader

    0.00

    0.00

    1. Main controller and material hopper are designed separately, so it is safe and convenient; 2. Stainless steel receiver ; 3. Microprocessor controller; 4. Motor protective device; 5. Alarm for shortage of material. 6. The filter is independent, so it is convenient for cleaning dust. 7. Window for inspection of filter;

  • Water Chiller

    Water Chiller

    0.00

    0.00

    1.The Tube-in shell condenser is used for higher efficiency. 2.The main power isolator. 3.The high and low pressure gauges show the refrigerant pressure of the system. 4.High/Low pressure safety relay protects the compressor. 5.Freeze protection valve is installed for compressor safety. 6.The proper three phase pump size matches your process flow and pressure requirement. 7.Hot gas bypass valve can balance the load on the chiller to meet the needs of the process. 8.The drying filter cleans and dries the refrigerant to protect the system from moisture of other contaminants. 9.The scroll and semi-hermetic compressor in high efficiency and can produce low noise. 10.Heavy-duty welded stainless steel tank with insulation for rust-free and energy saving. 11.The tube-in-shell evaporator is used fir higher efficiency.

  • Strong Crusher

    Strong Crusher

    0.00

    0.00

    QE Series Strong granulators has wide usage scope. Its main function is to crush all sort of soft or hard plastic, crushing massive, spherical, or strip-like plastic into tiny bits to recycle. The reuse level o f plastic is increased due to this process.

  • Shredder

    Shredder

    0.00

    0.00

    QSS series of single shaft shredder are small to medium size reduction machines suitable for processing a wide range of materials to a uniform particle size, The products can often be sold as is, or be sent for further processing through additional equipment (QE crusher),Throughputs typically range between 300kg/hr –5,000kg/hr+ depending on the model, material type .

  • Low speed Crusher

    Low speed Crusher

    0.00

    0.00

    QS series crusher with Hopper Dryer and sets beside the injection machine to collect the degraded material and scraps produced while injection molding. The regrinding is then conveyed by the blower to the mixing chamber with virgin material proportionally and melt in the plastic-melting chamber. Therefore, the waste materials are reclaimed right before their characteristics change so as to keep the quality, low waste and production cost.

  • Air Chiller

    Air Chiller

    0.00

    0.00

    Compressor is used "COPELAND" brand which made in the USA.The inside safety protection can guarantee the long lasting of the chiller well.The pump is used made in Taiwan and all parts of cooling system are imported from the USA,Mexico.Denmark and Japan. Equipped with shellpipe condenser and stainless steel cased evaporator, which are quite easy to be cleaned and maintained.Equipped with automatic water supply device in the water- tank.Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality. Larger than model CW-20 are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste. Complete with safety protection and error indication system, including compressor over load protection,pump over load protection,high pressure and low pressure protection and phase failure protection, Equipped with figure intellectualized temperature controls,which can accurately measure and control water temperature within the range of 5°C-35°C.

  • Dehumidifier and loader

    Dehumidifer and Loader

    0.00

    0.00

    ALL-in-one dehumidifier and loader (JDL series) combine the function of dehumidifying, drying and two-stage conveying into one single unit ( it is optional purchase for three-stage conveying),specified for the production of " hygroscopic engineer plastics " products, such as PA, PC, PBT, PET, ABS, PMMA etc, Under ideal conditions, a better honeycomb is optional to use so as to make dew point reach-50'C. The machine is characterized with nice appearance the patent for chain-wheel transmissions design, advanced techology, reliable performance, It is an indispensable machine in the modern industry.

12Next
To Total 2 page(s)